How to use the plastic renewal kit?

Using a product such as " Plastic/Metal Refresher " or "car interior plastic and metal reviver" is generally straightforward and may vary slightly based on the specific product chosen and the manufacturer's instructions.

Here is a general guide on how to use this type of product:

Materials needed:

• Bottle of "Plastic / Metal Refresher" with precision sprayer included in the kit
• Manual application swab included in the kit
• Clean and soft microfiber cloth included in the kit
• Hand protection gloves (recommended)
• Car interior cleaner (optional)

Procedure:

• Clean the surface : before applying the "reviver" make sure that the plastic and metal parts are clean and free of dust or dirt. If necessary, you can clean the surfaces with a specific cleaner for car interiors such as the Interior Cleaner kit
• Use protective equipment : it is always recommended to wear latex or vinyl gloves to protect your hands during application
• Mix the product : shake the "Plastic / Metal Refresher" product well before use to mix the ingredients inside it evenly
• Apply the product : pour a small amount of the product onto the clean pad included in the kit. Make sure you don't use too much product at one time. Start applying the product evenly to the plastic or metal parts you want to treat. You can start from one area and proceed sequentially. Rub the product on the surface with circular or linear movements. Make sure you cover all areas evenly and work the product into all plastic and metal parts
• Remove excess : After spreading the product, wait for the manufacturer's recommended drying time (usually a few minutes) and then remove any excess product with the clean, dry microfiber cloth included in the kit
• Check and finish the surface : carefully inspect and check the treated surfaces to ensure there are no streaks or excess product. If you notice uneven areas, go over with the clean cloth to better distribute the product
• Dry : Let the product dry completely on the plastic and metal parts. Usually, the drying time is short
• Repeat treatment : Repeat treatment as necessary to keep your car's interior plastic and metal surfaces in tip-top condition

Be sure to carefully follow the manufacturer's specific instructions for your "Plastic/Metal Refresher" kit for best results and to preserve your car's interior surfaces.

Read also:

• Where to apply the plastic reviver kit?
• When to apply the plastic repair kit?