Answers to questions about how to clean and protect your car
Tire Restorer is a high-end paint specially formulated for the care and maintenance of tires. Applied with a brush, this solution is perfect for those who wish to give their vehicle's tires a new shine, achieving a professional and long-lasting result.
Applying Tire Restorer is a simple process, but requires attention to detail:
Clean the surface: Before applying the product, make sure the tires are clean and dry. This may require cleaning with a car degreaser such as Degreaser and drying thoroughly. Remember to protect the surrounding surfaces with paper tape masking
- Mix the product : Mix the Tire Restorer tire paint well in its jar before use to ensure the mixture is homogeneous
- Use the brush : Use a brush to apply Tire Restorer. Make sure the brush is clean and in good condition
- Spread evenly : apply the product in thin layers to the tire surface. Avoid using too much product as this could lead to unwanted drips or drips
- Dry : Allow Tire Restorer to dry completely. Drying time may vary depending on weather conditions, but typically takes at least 15-20 minutes
- Eliminate excess product : after drying, check if there are excess product or any stains and remove them with a disposable non-woven cloth such as TNT Cloth
Read also:
The duration of Bug Remover on the surface of the car or motorbike depends on various factors and can vary above all based on the use of the vehicle.
In particular, the factors that can affect the duration of Bug Remover are:
- Atmospheric conditions : atmospheric conditions and external agents could interfere with the duration of the treatment, causing premature contamination of the surfaces
- Frequency of use : the frequency of use can also significantly influence and decrease the duration of treatment
Bug Remover is specifically designed to effectively remove insects and stubborn stains from the bodywork, combating their corrosive action. Its alcohol-based formula allows you to combine mechanical and chemical action to eliminate organic deposits on the bodywork while preserving its surface. Recommended in combination with TNT Cloth or Microfibre Cloth green after washing the car, it is the perfect ally in decontamination processes.
However, it must be considered that Bug Remover is mainly designed to remove contaminants and insect residues. If you want to prolong the duration of the treatment you need to move on to the car protection phase.
Read also:
The duration of the dashboard polish depends on various factors but, once applied in standard conditions, it lasts up to 14 days, thus allowing you to give a shiny appearance to the surfaces.
Factors that could affect the life of the product are:
- Preventive cleaning of the surface : dashboard polish is not a product designed for cleaning dashboards. It works more effectively if the surface to be treated has been previously degreased with a specific product
- External agents : in the case of particularly dirty external conditions, more frequent application actions are not recommended to remove accumulations of dust or areas of opacity
- Dashboard wear : A particularly worn or damaged dashboard may require more frequent treatment
For detailers who want to obtain professional results we recommend specific products for deep cleaning such as Interior Cleaner Kit , capable of eliminating accumulations of dirt and preparing the surface for the application of Dashboard Polish on a gold or orange microfibre cloth .
Read also:
The duration of applying an auto glass cleaner varies depending on the specific product used. These cleaners are primarily designed to clean and remove dirt, fingerprints, grease and other contaminants from car windows. However, they do not provide long-term protection like sealants or ceramic treatments.
Here are some considerations on the duration of the application of car glass cleaner:
- Regular Cleaning : Cleaning your car windows with glass cleaner is an essential part of regular maintenance. How long the results last will depend on factors such as climate conditions, the type of contaminants the glass is exposed to and how often the car is used. In general, glass tends to get dirty over time, so it is advisable to clean it regularly
- Temporary Results : After applying the cleaner, the windows will appear clean and clear, providing better visibility while driving. However, this cleaning is temporary and will disappear over time as the windows are once again exposed to dust, dirt and airborne contaminants
- Repeat Application : How often you need to reapply the glass cleaner will depend on your conditions and personal needs. In general, car owners tend to clean their windows whenever necessary, such as when they notice dirt or fingerprints
- Combination with protective treatments : To obtain a longer life, some car owners apply specific sealants or protective treatments for the windows after cleaning them with the cleaner. These treatments can help repel water, prevent drips and reduce the need to clean windows frequently
In short, the application of glass cleaner is temporary and does not provide long-lasting protection. The frequency of use will depend on the specific need and conditions, but in general car windows should be cleaned whenever they impair visibility. Regular window cleaning is essential to maintaining driving safety and the shiny appearance of your car.
Today we want to talk to you about Glass Cleaner from the Protecting The Care collection . It stands out from all other glass cleaners for its characteristics of unquestionable quality. Its formula has been carefully developed to provide tangible benefits, including a reduction in the time needed for cleaning, the prevention of the formation of unwanted streaks and a long-lasting result obtained. Applied to the surfaces with a microfibre cloth such as Microfibre Cloth green if the windows are particularly dirty or a soft finishing cloth such as Microfibre Cloth orange , it ensures absolute shine and a long-lasting cleaning action in just a few seconds. For these reasons, it can be added in a small quantity to the windshield wiper reservoir.
Glass Cleaner is truly a professional cleaner of unparalleled quality, ready to use, specifically designed for cleaning car windows. Thanks to its advanced degreasing formulation, it effectively eliminates dirt, fingerprints and streaks in a single, simple pass, giving surfaces a brilliant, streak-free finish. This product is ideal for car detailers who want to achieve perfection and transparency of the windshield, rear windows and windows never seen before!
Read also:
The anti-fog treatment, if carried out correctly, guarantees protection for up to 90 days on average.
To always keep the effectiveness of the treatment high and guarantee maximum visibility while driving, it is advisable to repeat the application every two months, but it is good to consider that there are some factors that could interfere with the actual duration:
- Atmospheric conditions : atmospheric conditions and external agents could interfere with the duration of the treatment, causing spot fogging in some portions of glass/visors. In this case it is advisable to repeat the application process.
- Cleaning of surfaces : cleaning the surface could lead to the removal of the protective layer that the glass defogger leaves on the treated surface
Antifog is not a nanotechnological treatment, therefore it is within everyone's reach and there is no risk of causing permanent damage to surfaces as could happen in the case of nanotechnological treatments. An incorrect application can be compensated for by thoroughly cleaning the windows with Glass Cleaner .
Read also:Matt Paint Cleaner stands out for its unique characteristics and the multiple benefits it offers. Thanks to its advanced formula, it exerts a deep degreasing and cleaning action on the matt surface of your car and guarantees delicate but highly effective cleaning, preserving the beauty and natural elegance of matt paints.
The lifespan of Matt Paint Cleaner depends on the use and maintenance of the vehicle.
In general, the detergent should be used regularly during washing and can last a long time. However, the exact duration will depend on the frequency of use and various external factors.
Since matte paint requires special care, regular use of the cleaner will help keep it in excellent condition, preserving its opacity and original appearance over time.
In summary, the application of matte surface cleaner is an essential part of the good maintenance of vehicles with matte paint. By following specific instructions and maintaining regular cleaning, you can prolong the life and flawless appearance of your vehicle's matte paint.
>Remember that your dull car deserves the best! And Matt Paint Cleaner is for these unique and distinctive features:
- Formulated for matt surfaces : specially designed and created to effectively clean matt car surfaces
- Leaves no streaks : The Care matte car cleaner leaves no visible streaks or marks on the treated surface, ensuring a uniform, imperfection-free result
- Protects the surface from external agents : in addition to cleaning, this product helps to protect the matt surface from the aggression of adverse agents, preserving its integrity over time
- Lasts a long time : Matt Paint Cleaner 's cleaning effects last a long time, reducing the need for frequent applications and allowing for long-lasting cleaning
- Suitable for frequent use : thanks to its delicate and protective formulation, the product is suitable for frequent use
Read also:
The durability of car wax depends on many factors, including the type of product chosen and the environmental conditions to which the car is exposed. Our recommendation is to always choose high quality products to obtain brilliant results and long-lasting protection.
In general, there are different types of car waxes:
- Traditional waxes : Traditional waxes offer protection that can last from 2 to 6 months, depending on the brand and climate conditions. Wax tends to wear out gradually over time due to exposure to atmospheric agents
- Synthetic Waxes : Synthetic waxes can last a little longer than traditional waxes, with a typical lifespan of 4-8 months. They are quite weatherproof
- Ceramic Waxes : Ceramic waxes or ceramic coatings offer long-term protection, lasting 1-2 years or more depending on the product and conditions. They are known for their durability
We have no doubts in recommending The Care traditional car wax .
Thanks to its advanced formulation with waxes of natural origin, Polishing Protective Wax creates a protective barrier that repels dirt, dust and contaminants, keeping the car shining over time.
It is, in fact, a truly premium treatment that offers exceptional shine results and long-lasting protection of the bodywork.
Polishing Protective Wax is formulated to maintain the shine of the paint over time, guaranteeing an excellent appearance for a long time. We recommend a monthly application to keep your car in an unparalleled state of brilliance.
Read also:
The benefits of Tire Restorer treatment may be visible for several weeks or even months, but can vary greatly based on certain driving and environmental conditions which can interfere with the life of the product.
There are several factors to consider:
- Weather Conditions : Weather and climatic conditions will affect the lifespan of the product. Exposure to UV rays, rain and extreme temperatures can reduce the duration of the Tire Restorer effect
- Driving Style : Duration may also vary based on your driving style. For example, sudden braking or sharp turns can increase tire wear and therefore reduce the duration of treatment
- Maintenance : Regular tire cleaning and reapplication of Tire Restorer tire paint can prolong its effect. If you notice that the appearance of your tires is starting to fade, you can reapply the product to keep them shiny and revived over time
Read also:
Anti-fog is a precious ally, almost indispensable for many detailers, which not only improves the aesthetic appearance of the car by reducing the preliminary operations of defusing glass surfaces, but also makes driving safe by avoiding situations of reduced visibility.
The Antifog Kit product is a kit specifically designed to obtain professional results, easy and quick to apply, which does not damage any of the surfaces it comes into contact with, therefore within everyone's reach. To guarantee the durability and performance of the product, it is essential to clean the car windows with Glass Cleaner before application.
Once the surface has been cleaned, it will be possible to proceed with the application of Antifog Kit by following the steps listed:
- Make sure the surface to be treated is not exposed to the sun or hot
- Make sure the cloths (if previously used) are clean and ready for use
- Wear the recommended PPE
Once these points have been verified, you can proceed with the application of the product as follows:
- Spray the product on the internal surface to be treated
- Spread the applied product evenly with one of the 2 cloths supplied, moving from bottom to top
- Leave to dry for approximately 3 to 5 minutes
- Remove any excess with the second cloth supplied Repeat the step if you notice streaks
After each wash the product must be reapplied, since cleaning would remove the protective layer that creates the product.
Read also:
The car decontamination phase, which includes the application of the Bug Remover product, is an important step in the car detailing process to remove residues of insects, midges and other contaminants from the paint surface.
Materials needed:
- Bug Remover : Make sure you use a specific product to remove insects and contaminants from car paint. Choose a quality product to avoid the risk of causing unwanted damage and even making the situation worse. Insects and midges can corrode surfaces over time. For this reason it is important not to compromise on the quality of the products chosen to obtain the desired result with complete peace of mind and to improve the level of cleanliness and the external appearance of the car.
- Manual swab, microfibre cloth or sponge : to apply the product and remove the unsightly residues of midges and insects, which are so common, you can spray the product directly on the surface and use a manual tool among those indicated here to spread the product and leave it act for a few moments
- Water : to moisten the surface if necessary. In any case, follow the manufacturer's instructions because the application method and recommended tools may be different depending on the manufacturer. Trust only well-known manufacturers whose quality is guaranteed
- Protective gloves : made of vinyl, rubber or similar to protect hands from direct contact with chemical agents potentially aggressive to the skin
Procedure:
- Prepare the surface : Make sure the surface of the car is cool to the touch and not exposed to direct sunlight. Wash your car and dry it thoroughly to remove dirt and mud
- Apply the product : Spray Bug Remover directly onto the affected surface or apply it to a pad or microfiber cloth or sponge. Leave the product to act for the time specified in the manufacturer's instructions. This usually ranges from 1 to 5 minutes
- Remove insects : Use a microfiber cleaning cloth or sponge to gently scrub the treatment area and remove insect debris and contaminants. Avoid applying too much pressure to avoid scratching the paint
- Rinse : rinse the treated area thoroughly with clean water to remove all product and insect residues
- Dry : Dry your car thoroughly with a clean microfiber cloth to avoid water spots
- Check and repeat: Carefully inspect and check the treated surface to ensure you have removed all insects and contaminants. Repeat the process if necessary
Applying Bug Remover is important to keep your car paint clean and free of contaminants that could damage it over time. Choosing the highest quality products will guarantee you an efficient transition, excellent results and will avoid further damage that low quality products could cause to the bodywork and the surfaces to be treated.
Find out more about chemical decontamination with the “fly remover”: How to do car decontamination: a complete guide .
Read also:
To apply Dashboard Polish dashboard polish correctly, it is necessary to clean the surfaces to be treated beforehand as the polishing process cannot take place on dirty and non-degreased surfaces.
Materials needed:
- APC product : it is necessary to have an All Purpose Cleaner product suitable for cleaning any surface such as the Degreaser
- Microfibre cloth : to apply the product it is possible to use a cloth dedicated to cleaning the surface: in this case both microfibre cloths may be suitable, such as the green cloth specific for cleaning and degreasing surfaces and which is washable and reusable or disposable cloths
Procedure:
- Apply the product : spray the Degreaser or other APC product directly on the affected surface or apply it on a microfibre cloth to make it soft and avoid possible scratches to the surface
- Remove dullness : use a microfiber cloth to gently rub the area to be treated and remove dirt and dullness
- Check and repeat the operation : carefully inspect and check the treated surface to ensure you have polished it correctly. Repeat the process if necessary
For the most demanding detailers there are specific products for deep cleaning such as Interior Cleaner Kit , capable of eliminating accumulations of dirt and restoring tone to the treated materials.
Once the surface is clean and free of oily substances, it is possible to apply the dashboard polish on the gold or orange microfibre cloth and on the surface by rubbing, then removing any residues with the long-haired part of the cloth.
Read also:
Glass cleaners such as Glass Cleaner are easy to apply products and can be applied in less than a minute with just one simple step.
They are products suitable for cleaning:
- glasses
- crystals
- windscreen
- rear windows
- mirrors
- windshields
- visors
- porthole
With the help of a cleaning cloth such as Microfibre Cloth green or a finishing cloth such as Microfibre Cloth gold , you can proceed by nebulising the product on the cloth itself and on the surface to be treated using circular movements until the glass is clean and dry.
Its formulation is so special that it does not require drying steps as happens with other products for domestic use for cleaning windows, which is why it easily enters the workshops of detailers who do not hesitate to use it also for domestic uses given its extremely high effectiveness.
We recommend using a little product at a time and always using a clean, dry cloth. You can also opt for the double-sided Microfibre Cloth orange which has one side suitable for short pile cleaning and the other for the long pile finish.
Read also:
Matt Paint Cleaner is a high-quality, non-foaming professional car shampoo specially developed for washing and cleaning matt surfaces. Easy to use, it is suitable for plastics, rubbers and external mouldings.
Here's how to proceed:
- Prepare the substrate : Before starting, make sure the matte varnish surface is cool to the touch and not exposed to direct sunlight. Start by rinsing the vehicle well to remove surface dirt
- Dilute the product : Check the manufacturer's instructions for the recommended dilution. You can use Matt Paint Cleaner pure or diluted in water. Use a clean bucket and a professional soft wash mitt or sponge to apply the cleaner
- Apply the product : dip the glove or sponge in the diluted detergent and begin applying it with light, circular movements on the matte surface. Avoid applying pressure and scrubbing too vigorously, as this may cause scratches
- Go section by section : Wash your vehicle section by section, making sure to rinse each part thoroughly before moving on to the next. This prevents the cleaner from remaining in contact with the paint for too long and prevents it from drying on its own, leaving stains or streaks on the matte surface
- Dry : after completing the wash, gently dry the surface with a clean microfibre cloth to avoid streaks
Read also:
The protective product for external plastics, known as " Plastic Refresher " is used to improve the appearance of the external plastic parts of the car, restoring their shine and protecting them from damage caused by external agents such as UV rays.
We are talking about all the components, including different types of plastic, external to the car such as: bumpers, headlight and tire protection covers, grilles, profiles, panels, fascias, fronts, moldings and other plastic components.
But it doesn't end there, the "renew and revive plastics", as well as protecting and renewing the external plastic parts of cars, perform the same function with excellent results on motorbikes, scooters, campers and other commercial or industrial vehicles.
Materials needed:
- "Plastic reviver" or "plastic refresher" products
- Soft microfibre cloth
- Protective gloves for hands
Procedure:
- Prepare the surface : Make sure plastic surfaces are clean and free of dust, dirt or debris. You can clean plastic surfaces with a specific cleaner for external plastics, if necessary, or with a car degreaser
- Mix the product : before using the "plastic reviver" product, shake the bottle well to mix the ingredients evenly
- Apply the product : Pour a small amount of product onto a pad or hand swab or clean microfiber cloth or directly onto the plastic surface. Begin applying the product evenly to the exterior plastics, working on small areas at a time. Once done, let it dry. Be sure to follow the manufacturer's specific instructions, as some formulas require different drying times
- Distribute evenly : with the manual polishing pad or other applicator of your choice, rub and distribute the product on the plastics with circular or straight line movements, making sure to cover all surfaces evenly
- Remove excess : After applying the product, wait for the manufacturer's recommended drying time (usually a few minutes) and then remove any excess product with a clean, dry, soft microfiber polishing cloth
- Check and finish the surface : carefully inspect and check the treated surfaces to ensure there are no streaks or excess product. If you notice uneven areas, go over with the clean microfiber cloth to better distribute the product
- Dry : Allow the product to dry completely on the plastics according to the manufacturer's instructions. Usually, the drying time is short
- Repeat the treatment : repeat the treatment when necessary, based on the environment in which the car is exposed, to bad weather, ultraviolet rays and adverse atmospheric agents, following the instructions of the manufacturer of the "plastic reviver" product
The use of a "plastic reviver" product can significantly improve the appearance of the car's external plastics, keeping them protected and shiny over time. Be sure to use a product specifically for this purpose and follow the manufacturer's instructions carefully for best results.
We have no doubts about the product to recommend to you, certain of its unparalleled quality: "Plastic Refresher outdoor" from The Care's Protecting range!
Let's discover its unique characteristics together
Plastic Refresher outdoor is able to restore a young and bright look to bumpers, spoilers, side panels and other plastic parts of the car. Its innovative gel formula works effectively, delaying the process of fading and degradation of plastic over time. This treatment is specifically designed for the external surfaces of the car, exposed to deterioration caused by adverse weather conditions. Plastic Refresher creates a water-repellent, durable and slightly greasy protective layer on the surface of the car which revives its appearance, while delaying the accumulation of dirt. After washing the car with Shampoo Wax , the product is applied with the manual Hand Pad and wiped with the orange Microfibre Cloth orange microfibre cloth or the gold Microfibre Cloth gold one. Its regular use helps maintain the integrity of the surfaces, ensuring that the car always remains like new.
Read also:
Applying car shampoo to shiny surfaces requires care to avoid damaging the finish and achieve a clean, shiny result.
Materials:
- Good quality car shampoo
- Two buckets, one for water with shampoo and one for clean water
- A sponge or wash mitt or a clean, non-abrasive microfiber cleaning cloth
- A garden hose or low-pressure water jet (if available)
Procedure:
- Prepare the product with water : fill a bucket with warm water and add the product. Mix well to create a soapy but not excessively foamy solution
- Prepare the product without water : the professional car shampoo is in a ready-to-use formula and can therefore be used pure. Spray it directly on the surface thanks to its convenient spray applicator or on the professional washing glove to moisten and clean it before starting washing
- Prepare the surface : Start by wetting the surface with plenty of clean water to remove coarse dirt. You can do this using a garden hose or a low-pressure water jet
- Wash the surface : dip the sponge, glove or microfiber cloth in the shampoo solution and wring it out lightly so it doesn't drip excessively. Wash a small area at a time, working in sections. Apply the shampoo solution to the shiny surface with gentle, circular motions. Avoid applying too much pressure, as it may cause scratches. Change the sponge or cloth regularly to avoid bringing dirt back to the surface, frustrating the cleaning work in progress
- Remove impurities and contaminants : after having washed and cleaned well, taking care to inspect the entire surface to remove impurities and contaminants present on the bodywork and other external plastic and metal parts of your car, rinse immediately with plenty of clean water. Use a separate bucket or low-pressure water jet to completely remove the cleaner. Make sure there is no soap residue on the surface, as it can leave streaks and streaks
- Dry the surface : Dry the surface with a clean, dry soft microfiber cloth to avoid water spots. Be sure to dry gently without applying too much pressure
The professional shampoo from The Care Shampoo Wax collection contains wax and has been created to obtain a super shiny finish at the end of each wash, thanks to the combined use of the Shampoo Glove wash glove.
If you want an even shinier finish, you can apply an appropriate car polish after washing and drying the surface, following the manufacturer's application instructions. We recommend you try T47 and T57 polishes.
By following these steps, you will be able to clean and keep your car surfaces shiny for a long time and achieve a shiny, clean look. Remember to be gentle when applying to avoid damage to the paint or finish and to clean your car regularly. The washing frequency can be weekly or monthly depending on the weather conditions and the level of pollution present in the air.
Read also:
First, it's worth mentioning that Tar/Resin Remover is extremely effective at removing stubborn residues with minimal effort. Its water-based gel composition instantly and effectively dissolves tar and gummy and sticky residues from all types of surfaces. The dense, creamy and soft consistency in combination with the use of a manual application pad such as Hand Pad and a TNT Cloth non-woven cloth for removing the most stubborn contaminants or a microfibre cleaning cloth such as Microfibre Cloth green , allows application even on vertical surfaces and in difficult positions. Tar / Resin Remover not only returns the clean surface, but also preserves the original appearance of the car. Thanks to its powerful formula, it acts quickly, saving time and energy.
The correct application of the “Tar / Resin Remover” decontaminant is essential to obtain effective results.
Here's how to do it:
- Clean beforehand : Make sure the surface of the car is clean and dry before starting. The contaminant should be the only residue on the paint
- Wear protective gloves: Before application, wear protective gloves to avoid direct contact with the product, which could be irritating to the skin
- Shake the product : shake the bottle of Tar / Resin Remover well to mix its components
- Apply the product : apply the product directly to the contaminated surface. Use a targeted application to focus on the affected areas. Be sure to follow the manufacturer's instructions regarding how much product to use. You can use a manual application swab
- Leave to act : Wait for the product to act for the time specified by the manufacturer, which is usually a few minutes. During this time, Tar/Resin Remover softens and dissolves the contaminant
- Remove contaminants : After the working time, use a disposable non-woven cloth such as TNT Cloth or a microfibre cleaning cloth such as Microfibre Cloth green to gently remove contaminants. Use light movements and avoid applying excessive pressure to prevent scratches on the paint
- Final cleaning : after removing contaminants, be sure to wash and rinse the treated area well and dry the surface adequately
A practical example would be removing small drops of tar or resin that have been sprayed onto the side of the car while driving on a road undergoing maintenance. Applying Tar / Resin Remover to these stains allows you to eliminate them without damaging the surrounding paint.
Read also:
To apply Plastic Restorer or "renew plastics" or "restore and renew plastics," you can follow these steps:
Materials needed:
- Plastic Restorer
- A clean microfiber cloth
- Latex gloves (optional)
- Plastic cleaner (optional)
- A hand swab (optional)
Procedure:
- Preliminary Cleaning : Before applying "Plastic Restorer," make sure the black plastic parts are clean and free of dust or dirt. If necessary, you can clean the surfaces with a specific plastic cleaner or a car degreaser such as Degreaser and dry them completely
- Personal protection : wear rubber, vinyl or similar protective gloves to protect your hands during application
- Mixing the product : shake the "Plastic Restorer" bottle well before use to mix the ingredients and ensure uniform application
- Integrated Sponge Application : The bottle has an integrated Sponge Cap as an applicator, you can gently press to release the product onto the sponge. Apply the product evenly on the black plastic parts so as to completely cover the surface. Alternatively, you can opt for an application with a manual Hand Pad
- Even distribution : rub and distribute the product on the surface with circular or straight line movements. Make sure you cover all parts evenly
- Inspection and finishing : carefully inspect and check the treated surfaces to ensure there are no streaks or excess product. If you notice uneven areas, consider a second pass
- Final drying : Allow the product to dry completely on the black plastic parts according to the manufacturer's instructions
- Cleaning materials : Be sure to clean the built-in sponge or hand swab after use to prevent the product from hardening and not being reusable
- Maintenance : repeat the application of "Plastic Restorer" when necessary to keep the black plastic parts always in good condition
How to apply with the sponge bottle or a hand swab depends on your preference. Always follow the manufacturer's specific instructions for best results and be sure to apply the product to clean, dry surfaces.
Read also:
The universal multi-surface degreaser called APC like, for example, Degreaser , is a product suitable for degreasing and deep cleaning of every surface of the car, one of the products that must not be missing in the detailer's workshop.
The degreaser is a product to be applied, like all chemical products, with the necessary precautions and safety protections, such as gloves, which also help us not to get the surfaces dirty again if we lean on them.
Equipped with a microfibre cleaning cloth such as Microfibre Cloth green , you can proceed to apply the product to the cloth and surface to be treated, rubbing it until the product dries. This applies to all treated surfaces, both internal and external.
The effectiveness of the product is also proven in the deep cleaning process of tyres, being able to eliminate deposits of tar, iron etc. effectively. This process is essential before treating and restoring tires with Tire Restorer to amplify their performance.
Read also:
The application of Renewing Protective Detailer on matte paints requires attention to specific details to preserve the elegance of the matte finish.
Here's how to do it:
- Prepare the support : make sure the surface to be treated is clean and dry. Avoid using silicone-based cleaners as they can alter the matte finish. To wash your car, use a non-foaming detergent specifically for matte cars such as Matt Paint Cleaner
- Shake the product : Before use, shake the detailer bottle well to mix the product. This ensures even distribution without causing streaks
- Spray evenly : Spray the detailer on the matte surface to be treated, such as the hood or fender. Make sure the quantity is adequate but not excessive
- Spread the product : use a clean, soft microfibre application cloth such as Microfibre Cloth red to spread the detailer on the surface. This must be done with light, circular movements
- Dry : Let the detailer dry. Unlike gloss paint, matte paint must remain matte. There is no need to polish or rub the product to a shine
- Wipe : You can use a second clean microfiber cloth to wipe away any excess residue and to ensure the matte surface is streak-free
This application preserves the matte finish, providing protection and improving the appearance of the surface.
The application of this detailer is really simple and offers significant advantages, ensuring that the treated surfaces maintain a fresh and flaw-free appearance for a long time.
Renewing Protective Detailer is indispensable for car lovers eager to preserve the perfection of matte surfaces. Despite being a professional product, it is really easy to use: all it takes is a few minutes and a very soft microfibre cloth.
Thanks to its distinctive features, this quick detailer offers unparalleled protection and enhances the aesthetics of matt painted surfaces, guaranteeing long-lasting results and an impeccable finish. Its advanced formulation ensures tangible benefits, transforming each application into an authentic beauty ritual for your vehicle.
Read also:
Correct application of quick car detailer is crucial to achieve optimal results and maintain its shine.
Here's how to do it:
- Prepare the substrate : Make sure the car surface is clean and dry. It must be free of dust, fingerprints and surface contaminants
- Shake the bottle: Before using, shake the detailer bottle well to mix the product and ensure even distribution
- Spray evenly : spray the quick detailer on the surface to be treated. Typically, you can apply the product to a small section at a time such as the hood or fender
- Spread the product : Use a clean, soft microfiber application cloth to spread the detailer over the surface using light, circular motions. This will help distribute the product evenly
- Polish : Continue spreading the quick detailer until it has dried and created a thin glossy layer. There is no need to apply pressure, as the detailer should glide easily over the surface
- Wipe to remove excess : If necessary, use a second clean microfiber cloth to further polish the surface and remove any residue
For example, if you want to keep your vehicle shiny between thorough cleans, you can apply the detailer to specific areas, such as the hood and doors, to instantly restore the shine.
Brightening Protective Detailer shiny surfaces is an All In One product: it cleans, illuminates and protects the external surfaces of cars with shiny paint. This detailer is ideal for those looking for a way to preserve and enhance the shine of their automobile's surfaces, delivering a sparkling and sophisticated end result. Constant use of this quick detailer ensures long-term protection against adverse weather conditions and impurities, highlighting the intrinsic beauty of the vehicle.
Read also:
Correct application of wax is essential for surface protection and optimal appearance.
Here's how to do it:
- Pre-cleaning : Make sure the surface is clean and dry before application. Remove any dirt, dust or contaminants
- Manual application : you can apply the wax manually using a soft, slightly absorbent microfibre cloth which allows you to spread the product evenly on the surface and avoid waste
- Circular or straight-line motions : Apply the wax in circular or straight-line motions, following the manufacturer's instructions. Cover the entire area evenly and evenly
- Drying and removal : Allow the wax to dry for the amount of time indicated by the manufacturer. Once dry, remove excess with a clean, dry microfibre cloth and proceed with polishing to obtain a brilliant result
Long-lasting shine, advanced protection, easy application, water-repellent effect, weather resistance... all these are the promises that The Care Polishing Protective Wax for car wax keeps! Get yourself a thick, non-absorbent and very soft microfibre polishing cloth like Microfibre Cloth red and try it now!
Read also:
The Interior Cleaner Kit interior cleaner comes with a pack of five disposable TNT Cloth cloths and a Microfibre Cloth green microfibre cloth, ideal for cleaning all interior surfaces of the car.
Before proceeding, you need to check that you have adopted the appropriate safety rules for using the product and that you have cleaned the cloths correctly, if they have already been used previously.
To correctly apply the product, it is recommended to shake the bottle and spray on the green cloth and on the surface to be treated, making circular movements with the microfibre cloth until the surface is dry and clean. We advise you to check which surfaces can be treated with the product if you have any doubts, but as a rule it is a product suitable for all surfaces inside the car interior.
The process can be repeated as needed, before applying protective products such as Plastic / Metal Refresher interior Kit which aim to protect the clean and clean surface over time.
Read also:
Using a product such as " Plastic/Metal Refresher " or "car interior plastic and metal reviver" is generally straightforward and may vary slightly based on the specific product chosen and the manufacturer's instructions.
Here is a general guide on how to use this type of product:
Materials needed:
- Bottle of "Plastic / Metal Refresher" with precision sprayer included in the kit
- Manual application swab included in the kit
- Clean and soft microfiber cloth included in the kit
- Hand protection gloves (recommended)
- Car interior cleaner (optional)
Procedure:
- Clean the surface : before applying the "reviver" make sure that the plastic and metal parts are clean and free of dust or dirt. If necessary, you can clean the surfaces with a specific cleaner for car interiors such as the Interior Cleaner kit
- Use protective equipment : it is always recommended to wear latex or vinyl gloves to protect your hands during application
- Mix the product : shake the "Plastic / Metal Refresher" product well before use to mix the ingredients inside it evenly
- Apply the product : pour a small amount of the product onto the clean pad included in the kit. Make sure you don't use too much product at one time. Start applying the product evenly to the plastic or metal parts you want to treat. You can start from one area and proceed sequentially. Rub the product on the surface with circular or linear movements. Make sure you cover all areas evenly and work the product into all plastic and metal parts
- Remove excess : After spreading the product, wait for the manufacturer's recommended drying time (usually a few minutes) and then remove any excess product with the clean, dry microfiber cloth included in the kit
- Check and finish the surface : carefully inspect and check the treated surfaces to ensure there are no streaks or excess product. If you notice uneven areas, go over with the clean cloth to better distribute the product
- Dry : Let the product dry completely on the plastic and metal parts. Usually, the drying time is short
- Repeat treatment : Repeat treatment as necessary to keep your car's interior plastic and metal surfaces in tip-top condition
Be sure to carefully follow the manufacturer's specific instructions for your "Plastic/Metal Refresher" kit for best results and to preserve your car's interior surfaces.
Read also:
Tire Restorer is designed to restore and renew the finish of your car's tyres, significantly improving their appearance.
This product has several purposes:
- Restore and renew tires : Tire Restorer gives tires and other rubberized elements a deep, shiny black appearance, renewing and reviving the original appearance of the rubber
- Protects from UV rays : the application of Tire Restorer helps prevent damage caused by sunlight, preserving not only the color and finish of the tires, but also their health
- Reduces dullness : If your tires have signs of dullness or fading, Tire Restorer eliminates them and makes your car's tires dark and vivid again
- Water Resistant : The product offers water resistance, which means that the tires will remain shiny even after a rain
Why is this brush-on tire paint so special? For many reasons, let's mention a few:
- It has a unique formulation that guarantees exceptional and professional results at home
- It gives a renewed look and a noticeable shine to the tire rubbers
- It can also be used to renew car interior seals and rubber mats
- It offers durable protection and resists the most adverse weather conditions
- It is suitable for tires of all vehicles and models
- It spreads with a brush, allowing precise and controlled application of the product and ensuring uniform coverage
Read also:
To avoid the phenomenon of vehicle windows (cars and motorbikes) fogging up, you can resort to small tricks such as cleaning or specific treatments.
Correct cleaning of the glass and a treatment specifically designed to avoid the phenomenon make it easier to eliminate condensation on the glass.
What can really make the difference, therefore, is the application of quality products to prevent the internal fogging of windows, windshields, glass, mirrors, rear windows, visors and helmets, in order to protect the surface from the phenomenon which, if were it to occur while driving, it would put the safety of the driver and passengers at risk.
Antifog is not only an ally that allows us to save time by not having to scratch the car windows, but also a precious support in terms of safety.
Read also:
Fogging of windows, windows, windscreens and visors is a phenomenon that can also occur while we are driving. Here we will discover how to remove fogging on car windows in a few simple steps:
- Turn on the heating : setting it to the maximum temperature and directing it towards the car windscreen both to defrost and to remove fogging
- Air conditioning : the use of air conditioning helps combat the phenomenon by effectively reducing the humidity inside the vehicle
- Open the windows : to allow an exchange of air so that the humidity and internal/external temperature balance, avoiding the phenomenon
To avoid the phenomenon, there are some products or treatments, such as Antifog Kit , which allows you, after a quick application, not to have to worry about windows and visors fogging up.
Things not to do
We do not recommend following the intuition that leads us to "clean" the glass with our hands as the sweat and impurities present will deposit on the glass, dirtying it and further contributing to the fogging phenomenon.
Another not recommended practice is to use products that are not specific for glass, which, like sweat, could release residues that worsen fogging.
A fundamental factor to avoid fogging and make it less persistent when it occurs is to regularly clean your car windows, generally improving visibility while driving.
Read also:
The phenomenon of fogging of windows and visors generally occurs when differences or variations in temperature occur, some of the most common can be:
- Heating : when we turn on the car's internal heating in winter or wear a motorbike helmet, we generate a temperature difference with the outside inside the vehicle or helmet
- Rain : during rainy days humidity is generated which can cause condensation on the windscreen, as it is colder than the surrounding air
- Temperature change : when sudden changes in temperature occur in a hot or cold environment
Fogging is a natural phenomenon that limits visibility and can compromise driving safety.
To reduce or avoid it, clean the windows regularly with Glass Cleaner , carry out the Antifog anti-fog treatment and follow our advice.
Read also:
Anti-fog is a precious ally, effective for simply improving visibility while driving.
The most suitable period to apply it is certainly when winter or the first cold weather arrives, but you will certainly have noticed this phenomenon not only on cold days, but also during a storm or in cases of strong humidity or following a sudden change of the temperature.
Antifog Kit is useful precisely because, correctly applied, it can make driving better and safer, protecting windows, mirrors, windshields, windows, rear windows, and thus preventing this phenomenon from occurring with a simple and rapid preventative action.
Read also:
Dashboard Polish is a precious ally for quick detailing operations or surface maintenance, to be applied when the car dashboard is dirty or opaque.
In fact, dashboard polish must be used to give a shiny effect and remove the presence of opacity and dust from the treated surface quickly and easily. Many detailers consider it fundamental for quick detailing actions. The product is not aggressive and can be used as needed.
Dashboard Polish is therefore an excellent product that takes a few minutes to apply, but it is not a product suitable for cleaning the surface and, indeed, it is less effective on non-degreased surfaces. For the preventive cleaning process we recommend generic products such as Degreaser or specific products such as Interior Cleaner Kit .
Read also:
Glass Cleaner is an excellent ally for cleaning and caring for car windows, but how often should it be applied?
In general, window cleaning products should be applied whenever the glass is dirty or visibility is reduced.
It happens more easily, in the dark, to notice distorted lights, unwanted reflections or signs of fingerprints or dirt that prevent correct visibility. Clean glass is also less prone to fogging and makes the clearing procedure easier. The detailer who pays attention to detail does not allow more than 14 days to pass between one cleaning and another, but this depends more than anything on the conditions to which the glass is subjected.
Used regularly as needed, Glass Cleaner will keep transparent and shiny:
- glasses
- crystals
- windscreen
- rear windows
- mirrors
- windshields
- visors
- porthole
On the same surfaces, treatments such as Antifog Kit can help eliminate the problem of internal fogging on surfaces and better protect the glass, preventing dirt from clinging and making cleaning processes less frequent.
Due to its extraordinary characteristics and great effectiveness, Glass Cleaner can be added in a small quantity to the windshield wiper reservoir to restore the shine of the windscreen whenever desired.
Read also:
The use of outdoor cleaners for shiny cars such as Shampoo Wax can be used at every car wash as they are not aggressive on surfaces. In general, the frequency of car washing depends greatly on the use of the car and the environmental conditions.
Certainly a cleaning and perhaps even protection process is always recommended when we expose the car to hot or cold climates rich in salt, etc. which could affect the cleanliness of the bodywork but in general it is always recommended before polishing and protection processes.
If you want an even shinier finish, you can apply an appropriate car polish after washing and drying the surface, following the manufacturer's application instructions. We recommend you try T47 and T57 polishes.
Find out how to best wash your car with our dedicated guide .
Read also:
The " Tar / Resin remover " product is an essential element in the second phase of car detailing, that is, decontamination. This product is designed to firmly, but gently remove tar, resin, glues and other sticky contaminants that can adhere to the car paint and cause damage or corrosion over time.
Tar/Resin Remover should be applied when there are contaminants such as tar, resin, glues, gummy residue or other sticky substances on the surface of the car.
Here are some situations in which it is appropriate to use this product:
- Visible Contaminants : If you notice dark or sticky spots on your car paint, it's a clear sign that the tar or resin needs to be removed. These contaminants can come from fresh asphalt, trees, or road construction. For example, if you've noticed dark tar stains on the underside of your car doors due to roadworks, Tar/Resin Remover is ideal for removing them before proceeding with the next steps of car detailing
- After washing : washing serves to clear the surface of most residues and traces of dirt. The application of Tar / Resin Remover can follow this first phase in order to act on the remaining stubborn encrustations and specifically on the gummy residues of the resin or on the accumulations of tar on the bodywork. This ensures that contaminants are effectively removed before proceeding with a second rinse and wash and general cleaning of the car
- In the preparation process : Before carrying out subsequent steps such as applying polish or polishing, it is important to ensure that the paint is free of contaminants. Tar / Resin Remover plays a vital role in this preparatory phase
Here's what you'll need to do in the presence of resin and tar:
- carefully inspect the paint surface for areas where tar, resin or other sticky substances are present
- Carefully read the manufacturer's instructions containing specific details on how to apply and use the product effectively
- wear protective gloves to protect your hands
- wash the car, apply Tar / Resin remover directly to the contaminated surface and leave to act for the recommended time, generally a few minutes
- use a microfiber cloth to gently remove contaminants
- rinse and rewash the car to remove all residues
The application of Tar / Resin remover is particularly important when there are contaminants that are difficult to remove by washing alone. This product can help ensure a clean, contaminant-free work surface before proceeding with subsequent steps of car detailing, such as applying polish or buffing.
Read also:
The Plastic Restorer product is a long-lasting protective treatment and does not need to be applied frequently in the regular maintenance routine. Since it is a water-based black paint, its use is only expected occasionally in certain situations .
Here's when you can apply this type of product:
- To revive aged black plastic parts : apply "Plastic Restorer" when the black plastic parts of the vehicle age and lose shine, to restore them to a better state
- After restoration or cosmetic correction work : If you have performed cosmetic correction or restoration work on black plastic parts, "Plastic Restorer" can be applied to complete the process and preserve the results. For example, after a small repair with Plastics Putty and painting the bumper or external plastics with a primerless spray paint such as Texturizing or Paint , you can use Plastic Restorer for the maintenance phase
- In anticipation of special events : before attending automotive events, shows or exhibitions, apply the product to make the black plastic parts stand out and present the vehicle impeccably
- As part of a preventive protection : you can apply "Plastic Restorer" as a preventive measure to protect the black plastic parts from any damage caused by UV rays or environmental pollutants
- After spot cleaning : If you have performed a spot cleaning of the black plastic parts to remove specific stains or contaminants, for example using a degreaser such as Degreaser , applying the product can help restore the original appearance
- To preserve the original appearance : if you want to keep the black plastic parts in perfect condition, from time to time (for example, a couple of times a year) you can apply the product to avoid deterioration over time
In general, Plastic Restorer is a treatment that is applied occasionally, not as part of your regular cleaning routine, to preserve and improve the appearance of your vehicle's black plastic parts. Be sure to follow the manufacturer's instructions carefully for best results and apply to clean, dry surfaces.
Read also:
Matt Paint Cleaner is a specific, high-performance and effective cleaner on matt surfaces, being specifically designed to guarantee impeccable results on matt surfaces, but when should you apply the cleaner for matt cars?
A high quality exterior cleaner for matt cars such as Matt Paint Cleaner can be used at every car wash as it is not aggressive on surfaces. The most accurate detailers carry out the washing once a week, but this depends on the way the vehicle is used, the context and external factors. Therefore, it becomes difficult to provide a general indication that can be suitable for all detailers: the frequency of use can change based on the degree of detailing you want to achieve or the level of dirt that can accumulate in some seasons or in some areas more than in others.
A cleaning and protection process is certainly recommended when the car is exposed to very hot or cold climates, in the presence of pollutants or environments rich in salt, etc. which could affect the cleanliness of the bodywork.
In general, it is always recommended before polishing and protection processes.
As stated so far, the application of " Matt Paint Cleaner " is appropriate in different situations, taking into account the specific needs of matt paint:
- During Regular Cleaning : Matte Surface Cleaner can be used during regular vehicle washing to remove dirt, dust and contaminants. You can do this every time the car is washed. We recommend regular washing to preserve the original beauty of your car's matte finish
- Before special treatments : if you are going to apply maintenance products or specific treatments for matte paint, such as the quick detailer for matte paints, it is advisable to first clean the surface with detergent to ensure that the treatment adheres correctly
- After exposure to contaminants : If your vehicle has been exposed to contaminants or adverse weather conditions, such as acid rain or tar residue from road surfaces, matte paint cleaner can effectively remove these harmful substances
- For removing stubborn stains : If you notice stubborn stains, such as insect residue or hard water drops, the cleaner can help eliminate them without damaging the matte paint
- Before Special Occasions or Shows : If you want your matte finish vehicle to look pristine for special events or car shows, you can apply the cleaner to ensure it is spotlessly clean. But we think that every day is special for your elegant matte car!
Read also:
The Degreaser degreaser, but APCs in general, can be applied as needed on different surfaces.
Its strong degreasing action makes this product suitable for any detailing situation and essential before and after most processes, such as:
- Before and after a small repair with body fillers
- Before and after washing and decontaminating the car
- Before and after the process of polishing and renewing surfaces with polish
Degreaser best prepares any degreased and deeply cleaned surface for the application of specific car care and maintenance products.
This product can also be considered a must have for your detailer workshop, as it will undoubtedly be one of the most frequently used. Its action does not damage the surfaces on which it is applied, therefore making it a useful and effective product for all deep cleaning needs and suitable for repeated and frequent use.
We recommend applying it with a microfibre cleaning cloth such as Microfibre Cloth green .
Read also:
The matt paint detailer can be applied in different situations, taking into account the specific needs of the matt paint:
- After washing : After washing the vehicle with matte paint, detailer can be applied to restore and protect the finish
- Between cleansing : As with gloss paints, the detailer can be used between regular washes to keep the matte surface clean and protected
- After Removing Small Contaminants : If you notice small contaminants on the matte surface, such as water spots or dust, the detailer can remove them without affecting the matte finish
- Before special events : Before attending events or car shows, apply detailer to bring out the appearance of the matte paint
In particular, matte paint requires the use of specific products such as Renewing Protective Detailer to preserve its original appearance.
Renewing Protective Detailer matt surfaces is, in fact, a premium product, specifically created for the cleaning and protection of matt surfaces. Its formulation aims to clean, protect and renew surfaces, giving a clean and well-groomed appearance. The application of this detailer is really simple and offers significant advantages, ensuring that the treated surfaces maintain a fresh and flaw-free appearance for a long time.
Read also:
The quick detailer for shiny surfaces can be applied in different situations depending on the needs of use.
In particular, the following can be applied:
- After washing : The detailer can be applied after a complete car wash. This way, it adds extra shine and protects the surface between washes
- Between cleansing : If you want to keep your car shiny between regular washes, the detailer is ideal. You can apply it when you notice the shine starting to fade
- After removing small contaminants : If you notice small contaminants on the surface, such as hard water drops or light water stains, the detailer can remove them and restore the shine
- Before special events : before special events and in general whenever you want to shine your car
Brightening Protective Detailer represents a product of excellence in the field of car care. Its unique formulation not only guarantees an unparalleled level of shine, but also offers superior protection against damage caused by atmospheric agents such as sun, rain and contaminants.
Read also:
The Plastic / Metal Refresher kit can be used at various stages of the car detailing process, but is usually applied during the "protection" and "finishing" phase of the interior.
All the occasions in which you can use the plastic renewal kit:
- After cleaning : after carrying out a thorough cleaning of the car interior, including plastics and metals, the "renew plastics and metals" kit can be applied to protect and improve the appearance of the surfaces
- Before polishing : if you intend to polish or refresh the plastic and metal surfaces of the interior, applying the "renew plastics and metals" kit before polishing can prepare the surfaces and facilitate the process
- After the correction : if you have corrected scratches or imperfections on plastic or metal surfaces, applying the kit can help preserve the results of the work done
- As a final finish : the "renew plastics and metals" kit can be used as a final finish to give a clean and shiny look to the car's interior before a car show or a moment where it is important to present the interior in its best form and shine
Plastic / Metal Refresher is a professional product, suitable for application on surfaces of all colours. The kit includes, in addition to the plastic renewing product, all the accessories necessary for the correct application of the product: the manual Hand Pad and the green microfibre cloth Microfibre Cloth green .
Read also:
The protective product for external plastics, known as "plastic reviver", " Plastic Refresher " or "plastic renewer" is applied when you want to improve the appearance and protection of the external plastic parts of the car. Here are some common situations where you can apply this type of product:
- Regular maintenance : you can apply the "plastic reviver" product as part of your regular car maintenance routine to keep the exterior plastics in good condition and prevent loss of shine
- After washing the car : it is common to apply "plastic reviver" after washing the car to revive the plastic parts and give them a fresh and renewed look
- Before exposure to UV rays : Apply the product before prolonged exposure to the sun or in environments where external plastics may be subject to damage caused by ultraviolet rays
- After cleaning the plastic parts : if you have cleaned the external plastics with a specific cleaner or degreaser, removing specific stains or contaminants, the application of the "plastic reviver" can complete the process, providing long-lasting protection and restoring the shine
- Before special events : If you are attending automotive events or exhibitions, you can apply the product to bring out the exterior plastics and improve the overall appearance of the car
- After repairs or restoration work : After repair or restoration of external plastic parts, the application of the product can protect the new finish and integrate it with the rest of the automobile
In general, you can apply "plastic reviver" in various situations to improve and protect the exterior plastics of the car. However, always follow the product manufacturer's specific instructions for best results and ensure you apply it to clean, dry surfaces.
Read also:
Tire Restorer is not an ordinary tire paint, but a solution designed to meet the needs of true car care enthusiasts. This product is able to give a restored and renewed look to the tires and an impeccable deep black color. Its action provides long-lasting protection to the tyres, preserving them from atmospheric agents and keeping them in perfect condition for a prolonged period.
The final result? Tires like new, with unparalleled shine and protection.
The application of Tire Restorer can be considered in different situations:
- In the maintenance phase : you can apply the product during the regular maintenance phase of the vehicle to keep the tires looking in excellent condition. This can be done as needed
- Before special events : If you want your vehicle to look pristine for special events, car shows or rallies, you can apply Tire Restorer to make the tires more attractive
- After cleaning : after having thoroughly cleaned and degreased the tires from dirt, mud or road residue, the application of Tire Restorer helps restore the original appearance
- In the case of dull or faded tires : If your tires have a dull or faded appearance, Tire Restorer restores and renews them, giving them a shiny black finish
In general, you can apply Tire Restorer when you want to improve the appearance of your car's tires and rubber parts and preserve them from atmospheric agents and pollutants.
The frequency depends on your preferences, driving and environmental conditions.
Read also:
Applying car wax is an important part of the polishing process, it offers excellent surface protection and gives a shiny appearance to the paintwork.
Here's when it's appropriate to apply it:
- After washing : the wax should be applied after washing and drying the car completely. This ensures that the surface is clean and ready for the protection offered by the wax
- After the correction phase : if you have performed a paint correction phase, such as removing scratches with abrasive pastes or polish, wax can be applied to seal and protect the freshly treated paint
- Periodically : Wax should be applied periodically to maintain protection and shine. The frequency will depend on the type of wax, the use of the car and the weather conditions. Generally, it is advisable to apply it every 1-2 months
- Before Winter : Before winter or adverse weather conditions arrive, applying wax can help protect your paintwork from damage caused by road salt, ice, and other weather elements
For example, if you just washed your car and want to protect the paint, now is a great time to apply wax. The wax will act as a barrier between the paint and external agents.
Among the car waxes on the market, we advise you to always choose only the highest quality products to obtain the best results and preserve them over time.
Polishing Protective Wax is one of these, because it is not a common car wax, but a real high-end beauty treatment created specifically for car enthusiasts eager to obtain exceptional results and long-lasting protection of the bodywork. This special car wax offers extraordinary shine and reliable protection, suitable for vehicles of all types with a glossy finish. Thanks to its advanced formulation with waxes of natural origin, Polishing Protective Wax creates a protective barrier that repels dirt, dust and contaminants, keeping the car shining over time.
Why do we think Polishing Protective Wax is so special? For a lot of good reasons.
Polishing Protective Wax offers a high quality result that maintains its shine over time. This product, completely free of abrasive agents, creates an advanced protective shield that protects the surface of the car from harmful elements such as UV, atmospheric agents and contaminants.
It spreads effortlessly, thanks to the extremely soft Microfibre Cloth red microfibre polishing cloth, making the application of the product simple and accessible to everyone.
It has a water-repellent effect which promotes the flow of water on the surface, reducing the formation of annoying water stains, keeping the car clean for a long time and maintaining its effectiveness even in the most unfavorable weather conditions.
Read also:
The Interior Cleaner Kit interior cleaner is specific for deep cleaning of interiors, being suitable for multiple surfaces.
Interior Cleaner Kit can be used every 4/6 months, based on needs and surface conditions. Alternatively, it can be used as needed, whenever you feel the need to do a deep cleaning of the car's interior. Once the surface has been cleaned, we always recommend a subsequent protection process, which will make the cleaning long-lasting by protecting the treated surface and making future cleaning and protection steps less frequent or faster.
It will therefore be necessary, after using Interior Cleaner , to reapply the protectant to the surface to protect it. In the case of the dashboard, for maintaining cleanliness and protection we recommend Dashboard polish which makes the maintenance process quick, requiring just 1 minute to treat an entire dashboard.
Read also:
Bug Remover is specifically designed to remove dead bugs and similar contaminants from the surface of your car. You can apply it to the following areas:
- Front of the car : The front of the car is the most common area for bugs to accumulate while driving, especially when traveling on high-speed roads. Apply Bug Remover to the front bumper, hood and windshield
- Headlights and lights : Insects also often accumulate on headlights and lights. Use Bug Remover to remove them from these surfaces without damaging them
- Grilles and vents : Car grills and vents can collect many bugs. Apply Bug remover on these areas to eliminate them
- Side parts of the car : if the bugs are also present on the doors or side panels, you can apply Bug Remover in these areas
- Glass and mirrors : If your car windows and door mirrors are contaminated with insects, Bug Remover can be used to remove them without damaging the glass
For example, after a long trip in the summer, you may notice that the front bumper of your car is covered in dead bugs. In this case, you can apply Bug Remover to this area to remove them before proceeding with washing and subsequent car detailing steps.
Bug Remover is useful not only in the automotive sector, but also for motorcycles. It can be used on:
- Front of the motorbike
- Headlights and lanterns
- Grilles and vents
- Glasses and domes
- Motorcycle fairings
- Helmet visors
Read also:
The shampoo for shiny surfaces is a detergent specifically created for cleaning the exterior of cars with shiny paint.
You can use the shampoo for shiny surfaces on:
- Exterior plastics of the car
- Moldings
- Exterior car lights
- Glossy surfaces
Shampoo Wax , as a bodywork cleaner, is indicated only for external uses and differs from its twin for matt paints Matt Paint Cleaner precisely in the fact that it is formulated for deep cleaning of shiny surfaces, capable of giving already in the rinsing phase after washing a shiny and brilliant appearance to the surfaces as it is enriched with waxes of natural origin.
Its application is recommended with the appropriate glove for professional washing and cleaning Shampoo Glove , which will allow you to clean your car as best as possible by improving the effectiveness of the detergent applied.
Read also:
Anti-fog is a fundamental product that is applied to car windows, such as the windshield, to protect them from the phenomenon of internal condensation, guaranteeing superior visibility and greater safety while driving.
There are, however, other fields of application in which the use of the product is particularly useful and effective:
- Windscreen
- Rearview mirror
- Internal crystals
- Rear windows
- Motorcycle visors
- Portholes and diving masks (nautical sector)
In fact, its uses are not limited to the mobility sector alone, but some detailers have also rediscovered and appreciated its uses for glasses, diving masks, home windows, bathroom mirrors, etc.
Antifog Kit is a box set specially designed to gratify all detailers : easy and quick to apply, it does not damage the surfaces it comes into contact with and guarantees professional results. To increase its effectiveness we recommend cleaning the car windows with Glass Cleaner before application.
Read also:
Degreaser is a multi-surface degreaser and APC product; therefore, it can be applied as needed on different surfaces.
In particular:
- Internal surfaces: rigid non-absorbent parts, in general plastics, fibreglass, inlays, leather or eco-leather seats, etc.
- External surfaces: bodywork, mouldings, plastics, fibreglass, lights, tyres, tyres, rims, etc.
- Accessories and more: helmets, leather or eco-leather gloves, motorcycle shoes, top cases, portholes, etc.
It remains a valid product also for cleaning glass, visors, mirrors and portholes when necessary, even if it does not surpass Glass Cleaner , specially formulated for this purpose, in terms of ease of use and results.
Its nature makes it very versatile even outside the specific detailing sector for which it was created, this makes it highly appreciated by detailers also for the maintenance and cleaning of tools and work surfaces.
We recommend applying it with a microfibre cleaning cloth such as Microfibre Cloth green .
Read also:
Matt paint detailer is a product designed to be used on matte paints and can be applied to the same areas of the vehicle that you would care about in a gloss paint, but with specific attention to the matte finish:
- Matt paint : This is the main surface to apply the detailer to. Adds additional protection and improves appearance without affecting the matte finish
- Matte Plastic Parts : Many cars with matte paint have matte plastic parts, such as bumpers or rearview mirrors. The detailer can maintain the dull appearance of these parts
It is important to note that Renewing Protective Detailer has been specifically formulated for matte paints, ensuring that the finish remains matte and the surface is protected from dust, contaminants and the elements.
Here are all its advantages in summary:
- Designed specifically for matte surfaces : this car detailer has been formulated to clean and protect surfaces with a matte finish
- Long-lasting protection against atmospheric agents : this product has a water-repellent action and offers long-term protection against the harmful effects of atmospheric agents, providing an invisible barrier against water and dust
- Leaves no streaks or residues : this quick detailer gives a flawless finish to the matt bodywork that leaves no streaks or unwanted residues
- Ease of use and professional results : its formulation allows for easy and quick application, guaranteeing professional results effortlessly and in a short time
- Suitable for frequent use : this product can be applied regularly without causing damage to the surface, thus allowing the vehicle's matt surfaces to be kept in excellent condition over time
Read also:
The shiny car detailer is versatile and can be applied to different parts of the car to improve its shine and protection:
- Paint : The car's glossy paint is the main surface to which the detailer is applied. This product gives extra shine and creates a protective barrier
- Windows and mirrors : the quick detailer can also be applied to glass and mirrors to improve transparency and repel water
- Chrome and metal parts : The chrome and metal parts of the car can benefit from the application of the detailer to maintain the shiny and shiny appearance and prevent corrosion
- Exterior Plastics : Some detailers are suitable for exterior plastics, such as bumpers or rearview mirrors, helping to keep them shiny
- Wheels and rims : In some cases, the detailer can also be used on wheels and rims to maintain their appearance
For example, if you are preparing your vehicle for a car show, you can apply detailer to the paint, chrome and glass to achieve a flawless look.
Brightening Protective Detailer is a quick detailer for high quality shiny cars. For what reasons?
- Its advanced formula guarantees an exceptional shine result
- Offers long-term protection against the damaging effects of the elements
- Its application is quick and easy, guaranteeing professional results effortlessly and in a short time
- It does not leave streaks or unwanted residues
- Assists the car drying process by avoiding streaks
- It is supplied with an ergonomic design sprayer that allows you to perfectly adjust and direct the spray
Read also:
Glass cleaner, such as Glass Cleaner , can be applied to all glass surfaces in your car.
In particular you can apply Glass Cleaner on:
- glasses
- crystals
- windscreen
- rear windows
- mirrors
- windshields
- visors
- porthole
Furthermore, a glass cleaner such as Glass Cleaner can be used on treated glass or with protective films since, thanks to its extraordinary characteristics, it is able to effectively clean the surface without attacking or damaging it. It is also ideal as a cleaner in the windshield wiper reservoir to quickly clean the windshield.
For an even more effective application you can use this product with a specific cleaning cloth such as Microfibre Cloth green or with a finishing cloth such as Microfibre Cloth gold .
Read also:
The interior cleaner kit can be used on different surfaces, thanks to its non-aggressive formulation it is one of the most loved and used products by detailers.
- Dashboards : ideal for deep cleaning of dashboards, capable of eliminating old residues and giving the original color to the treated surfaces
- Internal plastics : doors and other internal parts of the car, such as the rear-view mirror dome, the gear knob and similar
- Leather and eco-leather seats : suitable for seats in fabric or other materials, even those in leather and eco-leather
- Seals : suitable for cleaning the seals on the door closure
- Metal parts : for the sheet metal parts inside the door or other metal parts, chrome plating etc. possibly present
- Wooden and marble mouldings : it is also the ideal solution for deep cleaning for internal wooden and marble parts
Interior Cleaner kit consists of an APC cleaner and a pack of five disposable TNT Cloth cloths and a Microfibre Cloth green microfibre cloth, ideal for cleaning all internal car surfaces.
Some detailers, both to test the products and to appreciate the notable difference with their own eyes, apply paper tape to divide the treated surface, so as to be able to have a visual comparison between the part just cleaned and the part still to be cleaned. The results are surprising: the difference that the same surface has even after long periods of no treatments seems incredible!
Read also:
Matt surface cleaner should only be applied to vehicle parts with matt paint.
These areas may include:
- Hood
- Roof
- Front and rear bumpers
- Doorman
- Side panels
and other vehicle-specific elements with a matte finish.
Make sure not to apply the cleaner to parts with shiny paint, such as the windshield or side windows.
Also, avoid applying to unpainted surfaces, such as plastic or raw metal parts, to avoid damage or unwanted stains.
Since matte paint has special care requirements, it is crucial to ensure that you only apply the cleaner to the relevant areas to ensure optimal results and preservation of the matte finish.
Precisely because your car's matt paint requires dedicated care rituals, The Care products for matt cars are the best possible choice in terms of premium quality of the product and beauty of the results!
Why is Matt Paint Cleaner so special?
- It has a specific formulation for matt surfaces
- It doesn't leave streaks
- Protects the surface from external agents
- Lasts a long time
- It is suitable for frequent use
Use it in combination with the Reniewing Protective Detailer matte car quick detailer to keep your car in enviable shape!
Read also:
The Plastic / Metal Refresher kit , specially designed with a high-end formulation for car interiors, can be applied to various plastic and metal interior parts to improve their appearance and ensure long-lasting protection.
Here are some examples of internal parts on which this type of protective product can be used:
- Instrument Glasses : The kit can be used to improve the shine of instrument glass frames, contributing to a clean appearance of the dashboard
- Instrument Hood : The plastic or metal parts of the instrument hood can be treated to give a fresh look
- Steering wheel : The plastic and metal parts of the steering wheel can benefit from the application of the product for a feeling of freshness and protection
- Gear Lever : The top of the plastic or metal gear lever can be treated for a better appearance
- Air conditioning controls : Air conditioning and heating controls with plastic parts can be treated to keep them in good condition
- Radio panel : The plastic or metal parts of the radio panel can be treated to protect and revive them
- Door panels : The plastic or metal parts of the door panels can be treated to preserve the original appearance
- Interior door handles : Plastic or metal door handles can be treated for durability
- Ventilation flaps : Plastic or metal ventilation flaps can be treated to prevent the accumulation of dust and dirt
- Keys and Buttons : All the various plastic or metal keys and buttons on your car's controls can be treated to a clean finish
- Decorative Parts : Plastic or metal decorative parts inside the car can be treated to maintain the original appearance
- Window handles : Plastic or metal window handles can be treated for smooth operation and improved aesthetics
Plastic / Metal Refresher is a truly complete kit designed for car detailing enthusiasts who wish to keep the internal plastic and metal surfaces of their cars in impeccable condition. Can be used on any plastic or metal car interior parts that need protection and reviving. In combination with high quality accessories such as Hand Pad or the Microfibre Cloth green microfibre cloth, it guarantees long-lasting and professional results. You can use Interior Cleaner for a thorough, deep clean of your car's interior before protecting metal and plastic parts with Plastic/Metal Refresher .
Read also:
Plastic Refresher can be applied to various external plastic parts of the car to improve their appearance and ensure their protection. Here are some examples of external plastic parts on which you can apply this type of product:
- Front and Rear Bumpers : Car bumpers are often made of plastic and can lose their shine over time.
- Rearview mirror covers : Rearview mirror covers may be susceptible to damage from UV rays and may benefit from product application.
- Side moldings : Side moldings or exterior plastic trim strips can be revived to keep them in good condition.
- Window Frames : Window frames can be subject to sun damage and wear and tear, but the application of "plastic reviver" can keep them in good condition.
- Door Handles : Plastic door handles can lose luster and suffer environmental damage.
- Spoilers : Plastic front or rear spoilers can benefit from the application of the product to keep them in good condition.
- Grilles : Radiator grills or other plastic grilles can be treated to improve appearance.
- Bumper Fins : The fins or vents in the bumper can be treated for a smooth finish.
- Decorative bands : Plastic decorative bands or car design parts can be treated to maintain the original appearance.
- Seals : Plastic seals, such as those around windows or doors, can be treated for improved durability.
- Side mirror shells : Side mirror shells can be treated to keep them clean and shiny.
- Front and rear lights : Front and rear light housings can be treated to protect them from sun damage.
- Deflectors : Wind deflectors or other plastic accessories can be treated for better durability.
In general, "plastic reviver" can be used on any exterior plastic part of the car that needs protection and revival. Be sure to follow the manufacturer's instructions and clean surfaces thoroughly before application for best results.
Read also:
Tar / Resin Remover can be applied to a variety of car surfaces, including paintwork and other areas potentially affected by resin contamination, tar, gummy residue, sticky dirt and other stubborn stains.
Here's where you can apply it:
- Paint : Paint is the main surface you apply Tar/Resin Remover to remove tar and resin. You can treat specific areas or the entire surface, depending on your needs
- Plastic Bumpers : If your car's plastic bumpers are contaminated with tar or resin, the product can be used to remove them effectively
- Rubber Parts : In some situations, Tar/Resin Remover can be applied to rubber parts, such as seals or tires, to eliminate contaminants
- Headlights : If your car headlights are covered in drops of tar or resin, Tar/Resin Remover can help remove them, restoring their clarity and shine
- Windows or side mirrors : If windows or side mirrors are contaminated, the product can be applied to remove tar or resin
For example, if you have driven through an area where road resurfacing work has been carried out and you noticed that the car headlights are covered in small drops of tar, you can apply Tar / Resin Remover on these parts to eliminate the traces and restore the headlights to their original clarity and transparency.
Read also:
Body wax can be applied to various car surfaces to protect paint and other materials.
Here's where you can apply it:
- Paint : Car paint is the primary surface to which wax is applied. This protects the paint from contaminants, UV rays, and gives it a shiny appearance
- Bumpers and plastic parts : Wax can also be applied to bumpers and other plastic parts to keep them protected and shiny
- Chrome and metal : Wax can be used on chrome and metal parts to prevent corrosion and maintain a shiny appearance
The Care Polishing Protective Wax car wax offers an exceptional detailing experience. Thanks to its unique blend, rich in wax of natural origin and easy to apply, it shines, protects and enhances the appearance of the bodywork and all the surfaces where it is applied. Spread with the very soft and thick Microfibre Cloth red microfibre cloth, and passed over with the Microfibre Cloth gold microfibre cloth for a perfect finish, this protective wax ensures an optimal result on all types of glossy paints and also on seals and details made of plastic without the risk of damaging them. This wax is able to revive the treated surfaces of the car, restoring an appearance similar to the original one. The results are extraordinary: a radiant car protected from external agents, with an enviable finish!
Read also:
Tire Restorer should only be applied to car tires and tires and can also be used to renew car interior seals and rubber mats.
This high-end paint is specially formulated for the care and maintenance of tires of all models and all types of vehicles. Applied with a brush, this solution is perfect for those who wish to give a new shine to their vehicle's tires, obtaining a professional and long-lasting result.
Make sure to apply the product only to rubber surfaces and avoid other parts of the vehicle such as the bodywork, rims or glass.
Treating tires with Tire Restorer guarantees exceptional results and gives a renewed look to tires of all vehicles and models. It is important to perform the treatment carefully so make sure you are precise in your application to get the best results.
Read also: