Applying car shampoo to shiny surfaces requires care to avoid damaging the finish and achieve a clean, shiny result.

Materials:

• Good quality car shampoo
• Two buckets, one for water with shampoo and one for clean water
• A sponge or wash mitt or a clean, non-abrasive microfiber cleaning cloth
• A garden hose or low-pressure water jet (if available)

Procedure:

• Prepare the product with water : fill a bucket with warm water and add the product. Mix well to create a soapy but not excessively foamy solution
• Prepare the product without water : the professional car shampoo is in a ready-to-use formula and can therefore be used pure. Spray it directly on the surface thanks to its convenient spray applicator or on the professional washing glove to moisten and clean it before starting washing
• Prepare the surface : Start by wetting the surface with plenty of clean water to remove coarse dirt. You can do this using a garden hose or a low-pressure water jet
• Wash the surface : dip the sponge, glove or microfiber cloth in the shampoo solution and wring it out lightly so it doesn't drip excessively. Wash a small area at a time, working in sections. Apply the shampoo solution to the shiny surface with gentle, circular motions. Avoid applying too much pressure, as it may cause scratches. Change the sponge or cloth regularly to avoid bringing dirt back to the surface, frustrating the cleaning work in progress
• Remove impurities and contaminants : after having washed and cleaned well, taking care to inspect the entire surface to remove impurities and contaminants present on the bodywork and other external plastic and metal parts of your car, rinse immediately with plenty of clean water. Use a separate bucket or low-pressure water jet to completely remove the cleaner. Make sure there is no soap residue on the surface, as it can leave streaks and streaks
• Dry the surface : Dry the surface with a clean, dry soft microfiber cloth to avoid water spots. Be sure to dry gently without applying too much pressure

The professional shampoo from The Care Shampoo Wax collection contains wax and has been created to obtain a super shiny finish at the end of each wash, thanks to the combined use of the Shampoo Glove wash glove.

If you want an even shinier finish, you can apply an appropriate car polish after washing and drying the surface, following the manufacturer's application instructions. We recommend you try T47 and T57 polishes.

By following these steps, you will be able to clean and keep your car surfaces shiny for a long time and achieve a shiny, clean look. Remember to be gentle when applying to avoid damage to the paint or finish and to clean your car regularly. The washing frequency can be weekly or monthly depending on the weather conditions and the level of pollution present in the air.

Read also:

• Where to apply shampoo for shiny surfaces?
• When to apply shampoo for shiny surfaces?

The use of outdoor cleaners for shiny cars such as Shampoo Wax can be used at every car wash as they are not aggressive on surfaces. In general, the frequency of car washing depends greatly on the use of the car and the environmental conditions.

Certainly a cleaning and perhaps even protection process is always recommended when we expose the car to hot or cold climates rich in salt, etc. which could affect the cleanliness of the bodywork but in general it is always recommended before polishing and protection processes.

If you want an even shinier finish, you can apply an appropriate car polish after washing and drying the surface, following the manufacturer's application instructions. We recommend you try T47 and T57 polishes.

Find out how to best wash your car with our dedicated guide .

Read also:

• Where to apply shampoo for shiny surfaces?
• How to apply shampoo for shiny surfaces?

The shampoo for shiny surfaces is a detergent specifically created for cleaning the exterior of cars with shiny paint.

You can use the shampoo for shiny surfaces on:

• Exterior plastics of the car
• Moldings
• Exterior car lights
• Glossy surfaces

Shampoo Wax , as a bodywork cleaner, is indicated only for external uses and differs from its twin for matt paints Matt Paint Cleaner precisely in the fact that it is formulated for deep cleaning of shiny surfaces, capable of giving already in the rinsing phase after washing a shiny and brilliant appearance to the surfaces as it is enriched with waxes of natural origin.

Its application is recommended with the appropriate glove for professional washing and cleaning Shampoo Glove , which will allow you to clean your car as best as possible by improving the effectiveness of the detergent applied.

Read also:

• How to apply shampoo for shiny surfaces?
• When to apply shampoo for shiny surfaces?